Brick pavers that keep their warm color
Brick Paver Sealing in Ortega, FL
Call (904) 567-0456 for a free estimate to seal brick pavers at Ortega homes, walks and terraces.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Who seals brick pavers in Ortega, and when will they call back?
Brick paver walks, drives and terraces across Ortega, FL can get a free sealing estimate, and a reply lands within 1 business day, usually much sooner. The estimate is free and you choose whether to book. Phone (904) 567-0456 to begin.
Old brick has a color that concrete cannot copy. When the surface starts to decay, mildew settles in the shade or an old coat fails, that warm red fades toward brown. A clean, filled and sealed brick surface looks warmer and sheds stains. When you request your free estimate, say whether the bricks are clay or concrete and how old they are.
Which Ortega homes have brick paver work that can be sealed?
Ortega Terrace is known for large stone and brick houses, Old Ortega has early 1900s wood frame homes with walks and drives of their own, and the riverfront has big houses with terraces. Every one of them, and every place listed below, can ask for a free estimate. Not on the list? Phone (904) 567-0456.
Does brick need a different sealer than concrete pavers?
Often it does. Unilock says brick pavers are more absorbent than concrete, so choosing the right sealer matters, and that brick often takes a matte or low gloss finish to keep its natural look. A shaded brick area also dries more slowly, which stretches the wait before the coat can go on. Ask which sealer is planned for brick and why: request your free estimate.
Sealer chemistry splits into film forming and penetrating. A Northeast Florida company says film forming coats can blush white in humid weather and peel in two to three years, while a penetrating sealer soaks in and leaves no film. Ask which family the contractor plans to use. Phone (904) 567-0456 to talk it through.
Why does my old brick flake or show white spots?
A Northeast Florida company says tiny white rocks showing in the surface and a decaying top layer are the first sign a paver is breaking down. Salt bloom is a different thing: Unilock says natural salts rising from the paver leave a hazy film that clears over 2 to 3 months, sometimes up to a year, and that sealing too soon risks haze under the coat. Show the contractor the spots when you request your free estimate.
Milky patches in an old coat are a third cause. A local company says moisture trapped under the sealer or too many layers over the years makes it turn white, and another coat on top makes it worse. The old coat has to be stripped, the bricks cleaned and the joints refilled before a new one goes down.
What finish keeps brick looking like brick?
Matte or satin. One Northeast Florida company offers four finishes: wet look high gloss, wet look satin, natural matte and a penetrating natural stone finish. It describes matte as protection without the shine, with colors looking true to the day the pavers went in. Another says its wet look deepens reds, tans and grays. Ask to see both on a spare brick: request your free estimate.
Can old brick in a historic Ortega neighborhood be sealed safely?
Old Ortega became a National Register historic district on July 14, 2004, and its roughly 597 historic buildings include early 1900s wood frame homes. Ortega Boulevard itself was once a brick road. Older masonry is a reason to move carefully, not to skip sealing. Unilock says to test whether old and new sealers are compatible, so ask for a small test patch in a hidden spot first. Plan it by phoning (904) 567-0456.
What does brick paver sealing cost in Ortega?
No published page gives a rate for brick alone. This table builds one from the pieces that are published: cleaning from $0.22 per square foot and sealing from $1.90, both from one Northeast Florida company, plus $1.75 to $3.25 per square foot for a full clean, sand and seal from a washing company. For a figure on your own bricks, request your free estimate.
| Brick area | Clean only, from $0.22 | Seal only, from $1.90 | Clean, sand and seal |
|---|---|---|---|
| 250 sq ft | $55 | $475 | $438 to $812 |
| 500 sq ft | $110 | $950 | $875 to $1,625 |
| 800 sq ft | $176 | $1,520 | $1,400 to $2,600 |
| 1,200 sq ft | $264 | $2,280 | $2,100 to $3,900 |
Starting rates multiply the published per square foot figures and are minimums, so real quotes run higher. Brick is more absorbent than concrete, which can change the sealer and the labor. Joint sand, stripping and repairs are usually extra.
A Northeast Florida company lists square footage, condition, joint sand, repairs and old sealer as the main price movers. Hold a bid against the table by phoning (904) 567-0456.
Can loose or sunken brick be reset before sealing?
Yes, and it should be done first. A Northeast Florida paver company lists re-leveling bricks, replacing bricks and replacing restraint among its repairs, and another says it resets sunken or loose pavers before sealing so the coat protects the finished repair. A coat over a low spot preserves the dip. Ask about repairs when you request your free estimate.
How long will a coat last on brick pavers?
Unilock gives a reseal span of 3 to 5 years and says solvent based sealers can last four to five if maintained. A Duval County washing company calls two to three years typical and says sun, chlorine and storms pull it nearer two. Open brick near a pool or in full sun sits at the short end. Check the beading on your bricks by phoning (904) 567-0456.
What is the process for sealing brick pavers?
Brick adds patience to every step, mostly because it takes longer to dry. For a plan built around your bricks, phone (904) 567-0456.
1. Inspect
Loose bricks, flaking spots, old sealer and white patches are marked before a price is set.
2. Clean
Mildew and stains come off with a cleaner suited to brick and a controlled wash.
3. Dry out
In shade, drying can take about a day, so the schedule leaves room for it.
4. Refill
Joints get clean sand, compacted and cleared from the faces.
5. Coat
The chosen finish goes on thinly and evenly, then rolled where it pools.
6. Cure
Feet and cars stay off for 24 to 48 hours, longer if the weather is damp.
What do sealed brick pavers look like around Ortega?
Questions Ortega homeowners ask about sealing brick pavers
How much do people charge to seal pavers?
Published Northeast Florida rates run from $0.22 per square foot for cleaning and $1.90 for sealing up to $1.75 to $3.25 for a full clean, sand and seal. No published page gives a rate for brick alone, so ask for brick to be priced on its own line. Old sealer, loose bricks and heavy staining raise the total.
Is it good to seal pavers in Florida?
For brick, often. Brick absorbs more than concrete, Unilock says, so a coat helps keep stains from soaking in. Sealing is mostly about looks and easier cleaning, so the call depends on how the bricks look now and how much upkeep you want.
How long do paver sealers last?
On brick, plan on roughly two to five years. Unilock says solvent based sealers can last four to five years if maintained, and a Duval County washing company calls two to three years typical for pavers in the area. Shaded brick often outlasts brick in open sun.
Why is paver sealing so expensive?
Brick takes patience. It is more absorbent, so washing has to be thorough and the drying wait is longer, and in shade Unilock says drying can take about a day. Sand, repairs and stripping old coats add hours. The sealer is the smaller line on the bill.
Does brick even need to be sealed?
No. Unilock calls sealing optional for its concrete pavers and says it is more about looks than maintenance. Many people seal brick anyway to deepen reds and tans, slow stains and make cleaning easier. That is a choice, not a repair.
Will a coat make my old brick look glossy?
Only if a gloss finish is chosen. Unilock says brick often takes a matte or low gloss sealer to keep its natural look, and a Northeast Florida company offers four finishes from high gloss wet look to natural matte. Ask for a sample on a spare brick or a hidden corner.
What are the white spots on my brick pavers?
Two causes are common. Natural salts rising out of the paver make a hazy film called efflorescence, and a Northeast Florida company says white or milky sealer means moisture got trapped or too many coats built up. A contractor has to tell the two apart before anything new goes on.
Can brick that was sealed before get a new coat?
Sometimes. Unilock says to test whether old and new sealer are compatible, and local companies say failed sealer that peels, clouds or turns white must be stripped first. Coating over a bad coat makes it worse.
Can brick paver steps and walls be sealed too?
Walks and steps are usually included when they are paved with the same brick. Ask for each area by name on the estimate so the square footage and finish are clear.
Want brick that looks warm again?
Phone or send the form for a free estimate and a reply within 1 business day, usually much sooner.
Free, no obligation